Spearit NTR Speargun / Polespear Spectra Wishbone Kit (No Tools Required) Makes 3 Wishbones

This kit includes all of the parts required to assemble and install 3 Spectra® wishbones and enough extra Spectra® cord to rebuild the wishbones with the reusable NTR terminal beads. Introducing Spearit NTR, a line of spearfishing accessories designed to eliminate the knuckle busting hassle of assembly tools.--- These NTR terminal beads are designed to completely eliminate the need for wishbone installation tools. No more struggling with T type installation tools or needle nose pliers. Making bands just got easier even on the deck of a bobbing boat. They are made from high strength, ultra light weight and corrosion-proof glass reinforced plastic. If you choose to remove them from your old bands, they are reusable and yet are inexpensive enough to be considered disposable.--- Check out these easy instructions:--- Wishbone Assembly--- 1. Insert the wishbone cord through the butt end of the terminal bead and pull out a few inches from the knot chamber. 2. Tie the smallest material-appropriate end knot and seat it in the knot chamber. 3. Repeat steps 1 and 2 at the other end. Wishbone Installation--- 1. Lubricate the NTR terminal beads of a fully assembled wishbone with a generous amount of liquid hand soap or silicone lubricant. 2. Insert the point of the beads into the ends of the tubing and press them in with your thumb until the butt of the beads is flush with the end of the tubing. 3. Tie your constictor knots about 1/2" from the ends of the tubing. 4. Done!